To fit the following models 

Fits ELLSWORTH models:

Dare & Rogue (until 2007)

Please compare your hanger to the picture to ensure the correct fitting

To fit the following models

LITESPEED frames

KHS
2001-2003 - Flite 2000
2003 ? Flite 700, Alite 4000

2004 - 2006 Tirreno Razza 1000 Road Bike

KTM Team LC (light carbon)

AMBROSIO frames

ELLSWORTH glimpse frames and others

Please compare the picture to the hanger you have on your bike in order to find the right one

To fit the following models -

SCAPIN - Fits various models

Please note that this hanger is countersunk on the outer face, so the three fixing holes are NOT threaded

Please compare the picture to the hanger you have on your bike in order to find the right one

To fit the following models

PRINCIPIA

MTB 12mm axle - some of the frames

Please check you hanger against our picture to ensure correct match

To fit the following models 

WILIER

IZOARD and more...

Please compare the picture to the hanger you have on your bike in order to be sure that this is the one you need.

To fit the following models 

PRINCIPIA AKA PA082010

This mech hanger has 3 threaded holes, although only two will be used on the frames, depending on the model year

Please match your hanger to our image to ensure the correct fitting

To fit the following models

FULL-DYNAMIX 

Please compare the picture to your hanger to ensure the correct fitting

To fit the following models -

KONA
2010 - Coil Air, Dawg, Stinky, Stab Deluxe, Stab Supreme
2009 - Coil Air, Dawgma, Dawg, Stinky, Stab Supreme, Stab Deluxe, Minxy
2008 and Earlier: Coiler, Coil Air

Please compare the picture to the hanger you have on your bike in order to find the right one

To fit the following models

KONA
2010 - KULA, KULA DELUXE
2008 - Kula Supreme, Kula Deluxe, Major Jake 
2007 - Kula Supreme, Major Jake

FRW
2011 Lancer

COLNAGO
Strada Scandium

Please note this hanger is not threaded on the three mounting holes, as the screws go in from the outside, pass through the hanger and screw in to the threaded frame.

Please compare the picture to your hanger to ensure the correct fitting

To fit the following models

MERIDA
Carbon, Hardy, Matts, AM-800, 2009 AM-4000, 2010 one twenty, Crossway 8500, Merida 06 Matts Pro, Spresso 800, Crossway lite 3000-M, Ninety Six, Matts Scandium (HFS alloy) Hardtail and others.

FORME - Various
CENTURIAN - Various
UMF - Various
WIGGINS - Various 

Please note that this hanger has two different bolt hole fittings, so will work with multiple Merida frames.

Please compare the picture to the hanger you have on your bike in order to be sure that this is the one you need or send us a photo.