PILO D72 CNC gear mech hanger / derailleur hanger

To fit the following models 

CANNONDALE   aka A239Z / EBO
MTB, Non-standard - 1991 models only

Please note - The distance between the bolt holes is 14.33mm
The thickness of the frame part which is inserted to the hanger is 4.6mm 

We have another, very similar hanger, called D46, which is used for most MTB that were manufactured after 1991, this hanger has a wider frame fit of 6.6mm

Please compare the picture to the hanger you have on your bike in order to find the right one.